Services | Atwood Roofing & Maintenance | Atwood, TN
Roof repairs, full replacements, storm damage, gutters, metal roofing, flat roofs. Atwood Roofing & Maintenance covers it all in Atwood. Licensed, insured, manufacturer-certified.
Roof Replacement
Full roof replacement starts with a complete tear-off down to the deck. We inspect every board for rot or soft spots. In Atwood, we find decking damage on about 30% of tear-offs. Damaged sections get replaced with CDX plywood before anything else goes on. Then we build up: ice and water shield in valleys and at eaves, synthetic underlayment across the full deck, new drip edge on every edge, starter strip, field shingles, hip and ridge caps, and ridge vent. Dumpster, permits, and cleanup included.
Get a Free Quote →Roof Repair
Our roof repair process: inspect the issue, identify the root cause, quote the fix, do the work, warranty the repair. Simple. If the root cause is widespread (poor ventilation causes ice dams, for example), we'll recommend addressing that too. But the choice is always yours.
Get a Free Quote →Storm Damage Repair
Wind speeds above 60 mph cause shingle tab lift and adhesive seal failure per ASTM D7158 testing protocols. Our Atwood inspectors check the entire windward exposure. Not just the obvious damage. Poor ventilation causes ice dams which cause water intrusion under the shingle field during freeze-thaw cycles. We document all contributing factors so your insurance claim covers root-cause repairs, not just surface patches.
Get a Free Quote →New Roof Installation
For Atwood new builds, we recommend Tamko Heritage or Malarkey Vista AR for budget-conscious projects and Atlas Pinnacle Pristine with Scotchgard for algae-resistant performance. High-end builds get GAF Timberline HDZ or Owens Corning Duration STORM. Each carries different warranty tiers. We walk you through the comparison so you're choosing with real information, not marketing brochures.
Get a Free Quote →Metal Roofing
Metal roofing works on pitches as low as 3:12 for standing seam and as low as 1:12 with specific underlayment and sealant requirements. Steep pitches look incredible in metal. We help you choose the right panel profile, material, and color for your Atwood home.
Get a Free Quote →Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in Tennessee's weather.
Get a Free Quote →Flat Roofing
Modified bitumen is the best choice for residential flat roofs and low-traffic commercial applications in Atwood. We torch-apply SBS-modified base and cap sheets in a two-ply system. Granulated cap sheet handles foot traffic and UV exposure. 15-20 year warranty.
Get a Free Quote →Commercial Roofing
TPO is our most-installed commercial membrane in Atwood. 60-mil thickness, hot-air welded seams, mechanically attached or fully adhered over polyiso insulation. The weld is stronger than the membrane. 15-20 year manufacturer warranties depending on system build-up.
Get a Free Quote →Gutter Installation
Gutter replacement in Atwood costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →Roof Inspection
After a storm, our inspection documents hail hits, wind damage, lifted shingles, and cracked components for your insurance claim. We take measurements, count damage per test square, and prepare a report your adjuster can use. Free for Atwood homeowners. We only charge if you hire us for the repair.
Get a Free Quote →Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →Skylight Installation
Skylight installation includes cutting the roof opening, framing a curb with doubled 2x lumber, installing the unit with factory sealant, and weaving the step flashing into the surrounding shingle courses. Interior work includes drywall framing and trim. We handle the full job in Atwood. Outside and inside.
Get a Free Quote →